ezGeyser
Temperature control
Select the water temperature you want and have the controller hold the heater to it.
Roz subah geyser on karnay ki pareshani? Ya gas bill ne kar di jaib khaali?
A smart thermostat for your gas, electric and hybrid geyser
Ab garam pani, ezGeyser sambhalay. Hot water, handled.
Automatic ignition, temperature control and smart schedules, fitted to the geyser already in your home.
Up to 70% savings on your geyser's energy
The problem
Managing a conventional geyser should not be this inconvenient.
Load shedding can interrupt geyser operation and force users to repeatedly switch on or restart them. Conventional geysers may also continue heating longer than required, resulting in unnecessary gas or electricity use.
-
01
Repeated manual operation
Users may need to switch on or restart their geyser every time electricity or gas supply is interrupted.
-
02
Unnecessary heating
A geyser may keep running when hot water is no longer needed.
-
03
High energy bills
Poor control over heating duration and temperature can contribute to avoidable gas or electricity consumption.
-
04
Limited control
Traditional geysers provide little control over heating schedules, temperature or operating status.
The solution
Turn the geyser you already own into a smarter system.
ezGeyser combines electronic controls, sensors, automation and optional IoT connectivity to improve the way households run their geysers.
Smart scheduling
Set heating schedules that follow your household routine rather than running continuously.
Automatic operation
Compatible models start and stop heating according to temperature, timer or schedule settings.
Automatic ignition
Gas and hybrid models ignite automatically, with ignition retry where the model supports it.
Remote control
Premium IoT models are managed from the ezGeyser mobile application, wherever you are.
Up to 70% energy savings
Timers, scheduling and automatic cutoff limit heating when hot water is not required, so the geyser stops paying to stay hot for nobody.
How it works
Four steps, and our team does the hard one.
01
Select the correct variant
Choose a Hybrid, Gas or Electric model based on the geyser you already have.
02
Our team installs it
Contact us on WhatsApp and our team installs the controller, integrating it with your existing geyser.
03
Set your preferences
Choose the temperature, timer, schedule and operating mode supported by your model.
04
Let ezGeyser manage it
Heating runs to your settings and stops automatically when it is no longer required.
Product demo
See it actually running.
The interface, the controls, the scheduling and what it looks like on a real geyser in a real house.
The products
Two series. Start with the geyser you own.
Its fuel type decides which variant fits, and how you want to control it decides the series.
Select the units you need below, and an order button appears as soon as you have picked one.
Premium IoT Series
Connected control, nothing on the box.
ezGeyser Premium IoT is operated entirely through the mobile application, over the internet. The unit has no display or buttons: the controller runs heating automatically, and every setting lives in the app.
- Mobile application control
- Remote operation
- Smart schedules and timers
- Automatic heating management
Also includes temperature monitoring and control, operating status visibility, connected device features, and automatic ignition for applicable gas and hybrid models.
Mobile app
Full control in your pocket
On Premium IoT models the app is the entire control surface, which mostly matters on the days that do not go to plan.
- Running late: start the geyser on the way home instead of arriving to a cold tank.
- Guests for the week: set the schedules you need, then take them off again.
- Leaving town: check what it is doing without going back to look at the unit.
Premium IoT Hybrid
Connected control for hybrid geysers. Your settings carry over when the geyser switches between gas and electric.
Premium IoT Gas
Connected control for gas-based storage geysers.
Premium IoT Electric
Connected control for electric geysers.
Deluxe Series
Everything on the unit, no phone required.
ezGeyser Deluxe is designed for households that need digital temperature control, timers, automatic operation and simple button-based controls without requiring a mobile application.
- Digital temperature display
- Timer-based operation
- Automatic ignition for gas
- Local button-based control
Also includes temperature setting, automatic burner cutoff, automatic ignition retry where supported, and heating control based on the selected temperature or timer.
On-unit display
No phone in the loop
Deluxe keeps the controls on the geyser. The display answers the questions you would otherwise have to guess at, without anyone opening an app.
- What the water is at right now, and the target it is holding to.
- Whether it is heating at this moment, and on gas or on electric.
- The timer and schedule currently in force, changed from the unit itself.
Deluxe Hybrid
For hybrid geysers. Settings carry over when the geyser switches between gas and electric.
Deluxe Gas
Designed for gas-based storage geysers.
What changes
What actually changes in the house.
Hot water already waiting
It reaches temperature before the household needs it, instead of somebody starting the geyser and waiting around for it.
Survives the load-shedding cycle
When normal supply returns, compatible models carry on from their settings rather than waiting for someone to notice and restart them.
Nothing left running
Heating ends on its own, so the geyser is not still going an hour later because the house got busy and nobody went back to switch it off. That is where the savings of up to 70% come from.
Not a one-person job
The controls sit on the unit or in the app, so running the geyser stops being the job of whoever knows the trick with it.
Keep the geyser you own
A compatible geyser is upgraded in place. The heating system, the tank and the plumbing all stay exactly as they are.
Know where it stands
Current temperature and operating status are there to check, so you are not walking out to the geyser to find out what it is doing.
Compare
Premium IoT or Deluxe?
Both series run heating on their own once they are set. What separates them is where you set it: on the unit itself, or from the app.
| Capability | Deluxe | Premium IoT |
|---|---|---|
| Digital temperature display | Yes | No |
| Local button controls | Yes | No |
| Temperature control | Yes | Yes |
| Timer-based operation | Yes | Yes |
| Automatic heating control | Yes | Yes |
| Automatic ignition for applicable models | Yes | Yes |
| Mobile application | No | Yes |
| Remote operation | No | Yes |
| IoT connectivity | No | Yes |
| Hybrid variant | Yes | Yes |
| Gas variant | Yes | Yes |
| Electric-only variant | No | Yes |
Technology
A locally developed geyser control platform.
ezGeyser combines embedded electronics, sensing, control systems, product engineering and cloud connectivity. Running a geyser is a recurring household energy cost, yet many installed systems still depend on basic mechanical controls and manual operation.
Embedded hardware
Purpose-built controllers designed around how a geyser is actually run, engineered in-house alongside the sensing and control system.
Sensor-based automation
The controller acts on what it measures at the heater, so operation responds to the state of the system rather than running blind for a set period.
Gas and electric control
Different product variants support gas, electric and hybrid heating configurations.
IoT connectivity
Premium models connect supported controls and device information with the ezGeyser mobile and cloud platform.
Premium IoT onlyScalable product platform
The architecture supports multiple product variants, household use cases and future energy-management capabilities.
Efficiency through control
The efficiency work sits in the control logic rather than the heating hardware: deciding whether heating is needed at all, and for how long.
For manufacturers
Ship your next line of geysers smarter and connected.
The same control platform can be built into new gas, electric and hybrid geysers, so the product leaves the factory connected instead of being retrofitted after it reaches a home. Hardware, firmware and the app platform are engineered in-house.
- Control board The controller hardware, specified for your unit.
- Firmware Ignition, sensing and control logic for the model.
- Product integration Fitted into the product rather than added to it.
- Connected geyser Ships ready for the ezGeyser app and cloud.
Recognition
Incubated, funded, awarded and in production.
Incubators
Awards
Grants
Technology partners
Manufacturing customers
Who builds it
ezGeyser is built by KytherTek.
KytherTek is a full-stack product engineering company: not just a software house and not just a hardware lab. They cover circuit design and microcontroller firmware through to cloud infrastructure, mobile applications, 3D design and field deployment, so the hardware and the software are designed together rather than stitched together.
ezGeyser is one of those products. If you have something you want engineered to the same standard, that is the work they do.
- Circuit design
- Microcontroller firmware
- Cloud infrastructure
- Mobile applications
- 3D design
- Field deployment
Get in touch
Tell us what geyser you have.
Product inquiries, compatibility guidance, pilot deployments, distribution, partnerships, accelerator discussions or grant information. All of it starts the same way.
+92 304 447 9999WhatsApp, the fastest way to reach the team
hello@ezgeyser.comEmail us your question and we will reply
Office 1104, First FloorKytherTek, National Science & Technology Park, NUST H-12, Islamabad.
Ab geyser ki fikar, ezGeyser ki
Stop thinking about the geyser and let the geyser think about you.
Send us a picture of your geyser and we will tell you which ezGeyser fits it.